Finally here!

The BYC wingmount kit for the EK coupe EM1 with the option to have a custom size length wing upto 1800mm wide! (1.8 meters)

In the kit you will receive everything you need to run a functional track wing :-

  • 2x Lightweight aluminium wing mounts powder-coated black
  • 2x Bolt on wing brackets 
  • 6x cnc billet T6 aluminium lugs to be drilled and bolted to car boot/trunk
  • 1x proven on track & CFD (computational fluid dynamics) BYC wing with end plates (wing size 1400mm x 175mm Standard size) but you have the option to go as wide as 1800mm!
  • stainless steel nut and bolt fixings
  • This price includes delivery within UK mainland (for over seas shipping please select shipping location or send email to backyardcivics@yahoo.com with full shipping address and required kit)
  • Approx weight of full wing kit installed (5.5kg) or (12.1 lbs) standard kit.

Optional:

  • Have a custom made wing to your required length.  We now offer this option for people wanting to build wing kits to meet either there racing regulations or for custom builds! (example UK TimeAttack doesn't allow more than 50mm from each side from below wing mirror, You now have an option to build to max tolerances within your reg's)
  • Have custom Gurney flap made to length. (you will be need to drill and fit the gurney flap yourself with supplied rivets) The device operates by increasing pressure on the pressure side (TOP), decreasing pressure on the suction side (underneath), and helping the boundary layer flow stay attached all the way to the trailing edge.


Here is a video we have put together to show more in detail the BYC Single wing and the Dual wing set ups.

https://youtu.be/aTEkAeSWkpg

Also below are couple videos back in the day of testing on track because on track is where we spend most of our time testing...Yes we actually go on race tracks testing our products!

We have put many hours into the design work and CFD testing of these kits to make sure the wing is positioned in the best place for functional down-force.

https://youtu.be/kOWLJyahsCk

https://youtu.be/MApKfCsxrK4

email: backyardcivics@yahoo.com

Please note: The small slide on brackets are designed using the Bond On Method.  The  reason for this method is to minimise air disruption and to keep maximum low air pressure on the underside of the wing where down-force is created.  Using bolt on brackets or L brackets mounted to the underside of the wing, we have found from CFD studies that the drag ratio increases due to the surface area, creating air flow disruption as it passes under the bolted brackets.  This is the main reason we try to keep to the bond method on most of our designs where maximum functionality can be achieved.  Please allow 2-3 weeks turn around from time of order.


DISCLAIMER.... Due to the intended use all BYC products are sold “As Is” without any express or implied warranty of any kind.

All parts are made for “OFF ROAD” and “RACING” use only!  Installation of many BYC products can change the ride characteristics, centre of gravity and balance of the vehicle.

Because of the change and uses off road and racing you should familiarise yourself and all operators of operating the vehicle to prevent possible loss of control that result in serious injury or death.

Although BYC makes every effort to ensure the fit of our products slight manufacture changes may affect their compatibility.  We suggest always “test-fitting” a product prior to actual installation.

In addition BYC reserves the right to modify and or discontinue parts without notice.

Write a review

Please login or register to review

BYC EM1 civic coupe Wing Mounts

  • Brands BYC
  • Product Code: EM1 Coupe
  • Availability: In Stock
  • £450.00


Available Options